Anti-shatter films – Transparent 4 mil SR
Anti-shatter films – transparent 7 mil SR
Anti-shatter films and security films – Transparent 8 mil SR
Anti-shatter films – Silver 80 SR – Interior dark 4 mil
Anti-shatter films & security films – tranparent 4 mil EX SR
Frequently asked questions
Shatter protection film holds the broken bits of glass together. Intrusion protection film can also prevent burglary due to the time delay.
After removing the protective foil, spray the window and film with a assembly concentrate/water mixture, then position the film onto the glass and after that, scrape out the moisture again.
A1 intrusion protection film is either installed under the glass panes, when the window bars can be opened. Or if the window bars cannot be opened, the A1 intrusion protection film should be installed with a stable edge connection of transparent silicone.
In order to remove shatter protection film, heat the film with a hair-dryer. Then pull the film from one of its corners. You can pull it longitudinally easily. After the old film is removed, spray Ajax window cleaner on the windows in order to remove the residuaries of the adhesive material. The remaining residuaries can also be removed with the help of a shaving razor or a glass scraper after a short time.