UV-blocking films – transparent UV 3 SR
UV-blocking films – light gray UV 4 SR
UV-blocking films – light Brown UV 5 SR
Heat-blocking films & UV-blocking films 6 XiR
UV-blocking films TA 81 XSR
UV-blocking films – transparent UV 50 EX – Exterior
Frequently asked questions
UV-blocking film protects valuable goods, furniture or textiles from fading through agressive UV-radiation. Thus, some UV-blocking films also provide good heat protection.
Our UV-blocking film UV 3 is clear transparent and has a protection factor of 3 (fading protection three times longer than without a film). Our UV-blocking film UV 4 has a light grey tone and a protection factor of 4 (fading protection four times longer than witout a film), because the UV absorbers are contained several times. And our UV-blocking film UV 5 even has a light brown tone and a protection factor of 5 (fading protection five times longer than without a film).
After removing the protective foil, spray the window and film with a assembly concentrate/water mixture, then position the uv-blocking film onto the glass and after that, scrape out the moisture again.
In order to remove UV-blocking film, heat the film with a hair-dryer. Then pull the film from one of its corners. You can pull it longitudinally easily. After the old film is removed, spray Ajax window cleaner on the windows in order to remove the residuaries of the adhesive material. The remaining residuaries can also be removed with the help of a shaving razor or a glass scraper after a short time.